Visitors

 
Field Day

Field Day: June 23-24, 2018
General Info HERE
List Of 2018 Field Day Sites HERE

PAARA FIELD DAY OPERATION

Please join in the fun at PAARA Field Day.  We are located in Bedwell Bayfront Park, 1600 Marsh Road, Menlo Park. 

Download detailed directions from HERE

Operating starts at 11 AM Saturday and ends 11 AM Sunday.

The park is located at the Bay end of Marsh Road.  Enter through the main gate and drive to the end of the blacktop.  Follow the yellow direction signs to get to our operating area.  It's at the South East corner of the park.  Look for the antennas, you can't miss them.  If you want to help, please join us starting 5 PM Thursday and all day Friday for set up and testing.  You can also help take down Sunday afternoon.  It's great fun with a lot to learn about emergency field operations.


By Jack Daane, KR6CD

Field day is an emergency communication exercise. Each year, during the last full weekend in June, amateur radio operators presume there has been a major disruption to electric power and commercial communication systems. The power is off, there is no local phone service, no long distance, no cell phone, no internet service, even some of the government radio systems have been knocked out. In response, amateurs assemble two-way radio stations operating on emergency power to transmit messages over the amateur bands.

In a real emergency, radio amateurs would send messages, telegram style, for public officials over these stations. For example, the mayor might write a message to send to the governor, hand it to the radio amateurs who would then relay the message, station by station, to the state capital and deliver it. Similarly, the reply from the governor would be relayed back to the mayor.

That’s the idea behind field day, practice setting up a radio station on short notice and operate it on emergency power. Many amateur clubs such as PAARA take part.

Interested in participating? Well, there are three major activities to work on: moving and setup of the equipment on Friday, operating Saturday and Sunday, and then disassembly on Sunday. Everybody is welcome to join in.

First comes assembling the PAARA station on Friday. The electric generators, radios, towers, antennas, and shelters must be brought to the field day site and put together into working radio stations. This gives you a great hands-on opportunity to work with a variety of equipment. You’ll be piecing towers together, mounting antennas and rotators on them, threading transmission lines on them, and then hoisting them skyward. Down on the ground, there are power supplies and two-way radios to hook up. The generator has to be cabled to the radio equipment. You’ll see equipment you’ll never find in a radio store, and you actually get to use it, not just look at it.

Next comes operating the stations, starting on Saturday. There probably won’t be an actual disruption to commercial communication systems during field day, so instead of relaying telegrams for public officials, amateurs cont act one another to determine the range of each station.

Operators generally work in pairs at each radio. One person operates, the other logs contacts. The operator calls “CQ field day, CQ field day”, and gives the station’s call sign, W6OTX. When a distant operator responds to the call, the logger records the call sign and location of the far station. It is very similar to typical ham radio contesting, and clubs compete to see who gets the most points by contacting the most stations. This goes on for 24 hours straight, but obviously operators work in shifts of a few hours at a time.

During field day there are stations in the U.S., Canada, and many other countries participating on most of the amateur bands, including HF, VHF, UHF, and satellite. Most of the operating modes are used as well, such as CW, voice, packet, FAX, and even TV. Field day is a great opportunity to try a mode that you might not have at your own station.

PAARA typically has a CW and a SSB station on HF plus a station on VHF. Other bands and modes might also be used depending upon what the club members choose to do during field day.

Since a logger can serve as the control operator, you can be the radio operator and use modes that your own license class does not permit. For example, during field day, Technician class licensees can use voice or CW on the HF bands.

After the official field day operating period ends on Sunday, all that equipment has to come back down and go into storage for the next field day, or maybe a true communication emergency.

There is still work to do after field day weekend has past. The contact lists must be submitted to the ARRL for compilation. In addition, the field day planners get together to analyze the contact data to see where each station could reach, where it didn’t reach, and to revise the plan for the next field day in order to maximize the radio coverage area.

Field day is a lot of fun, a great way to work with a team of amateur radio operators, and try out the biggest variety of equipment you’ll probably ever see in one location.

 
   
Copyright © 2019-2020   Hosted by QTH.com   Webmaster: K6MM